Black and brass

Welcome to a new week my friends! Hope you had a lovely weekend!

Yesterday I finished up the last DIY project for the family room – I think I keep saying everything is the “last” project and then I realize I have another one. For for real – this is it. We’ve been able to rework most of what was in the room before in the new set up and I’m pretty excited about that. I’ve only made one purchase for the “new” space – a gorgeous chair I found a HomeGoods a few weeks back. I’m in lurrrve with it.

In our old set up we used a dresser as the entertainment center:

I use dressers all over our house for storage – they’re pretty and functional. Most of them are Craigslist finds – well, pretty much all of them actually. The one above is one of my favorites but it was too long for the new spot in the family room set up.

So I switched that out for one that’s been in our bedroom for years. I’ve always had a plan to paint it but I bought it because I LOVED the lines:

Most of my dressers I would never paint – even with some damage I love the warm feel of the wood. This one though, I’ve never loved. The finish was a “fake” look – it’s an odd look that I didn’t care for. It had almost a spattered finish on the wood, I’m not sure how else to describe it. Let’s just say it wasn’t a pretty wood finish. And I’ve always really disliked the hardware on it as well – it’s felt too frilly for me.

So I didn’t feel bad painting this one. I considered just sanding it down to a more natural state – I’m loving that trend lately. But the new chair that sits in front of it already has a lighter look and I knew it wouldn’t be enough contrast.

AND sanding it down would require a ton of work – taking it outside and trying to get into all the little detailed areas of the piece. I prefer sitting on my butt and painting inside. ;)

I started by wiping it down well – I’ve used tsp cleaner in the past but over the past few years I’ve realized just regular cleaning wipes work just as well. You just want to get any residue or dust off of whatever you’re painting.

I primed it with my favorite primer:

I have this tinted gray because I use it on all of our interior black doors. It’s a super thin primer and SO easy to apply. It always goes on incredibly well and dries really fast.

Because I wanted to replace the hardware I filled the holes on the top drawers (they were a different type of hardware than the rest of the drawers):

After the coat of primer I made sure to give the flat surfaces a really quick sanding:

I kind of loathe sanding but this is just a light, fast sanding to knock it down just a bit. You’ll want to do that between each coat of color too – if you don’t (I skipped it once or twice this time) your surfaces won’t be super smooth. Not a big deal but it feels better with a smoother finish.

I knew I was going to like it when it was all primed and ready for paint:

I swear sometimes painting a piece really helps the pretty details and lines shine.

I found this AWESOME brush at Lowe’s that I used for most of the painting:

It’s a square brush and I’ve never seen one like it. It’s made for painting window panels but it was perfect for getting into all the grooves in the dresser. Loved it!

I’ve said many times over the years that I believe every room should have a touch of black. It’s grounding and gives some great contrast. I used to paint ever.y.thing. black but I’ve stopped that. ;) But I knew this one would look striking in a darker color so I went for it. I used the Graphite color by Sherwin Williams that I’ve used for our interior doors.

I found hardware that matched the wide (five inch) span of the old hardware but it was a brushed nickel and kind of basic. I didn’t love it. So I held up the old hardware against the new dark color and feel head over heels with it:

Well huh! I’m not kidding when I say I really didn’t care for these handles before – and now I absolutely positively LOVE them. I gave them a good cleaning with my brass cleaner and they are looking so much better than before. (Yes I had to knock out that filler I had put in the top drawers.)

You can see all the pretty lines of the dresser here:

I am obsessed with it now. Obsessed:

It’s so beautiful, I couldn’t be happier with how it turned out! 

On our doors that Graphite color looks more black but you can see it’s true color better here – a dark, dark gray:

I haven’t dressed it up yet – I just threw stuff on it for the pictures.

This dresser serves as my “office” storage. Or at least it will soon – I have some items in it but need to switch out my supplies from the dresser that used to sit in my office.

The best part – I spent $7 on a new brush and that’s all this redo cost me. WHOOT! I had the primer and paint so that’s always a bonus. I haven’t distressed it at all yet – I’ve said before that distressing stresses me. :) After all that work I hate to mess it up on purpose. So I’ll probably just let that happen on it’s own. And soon I’ll put a couple coats of satin poly on the top to protect it against scuff marks.

I am still laughing about that hardware too – I can’t believe how much I love it against the darker color. I think this may be my favorite painted piece ever and it’s the handles that put it over the top for me. Have you painted furniture? Do you have a go-to color?

I’ll be back on Wednesday with the whole space! I’m going to work hard over the next two days to get all the smaller details finished up.

Wood planked coffee table

Hey hey all! It’s about time to get some DIY going up in here! With the family room under construction, our blogging conference a couple weeks ago and just basic summer slug-ness, I haven’t done much lately.

I’ll have plenty to do starting later this week – the big stuff is almost done in the family room. Then it’s my turn. :)

We haven’t had a coffee table in that room for a while – I took out our square one about a year ago and loved how open it felt, so it stayed that way. (It now lives at my sister’s.)

When I moved the furniture around to the way I’ll have it when all the construction is done I realized I really wanted one again. But I needed it to be long and skinny. I don’t have any long and skinny so I’ve kept my eye out for something that might work.

A few weeks back I found this at a local antique/thrift shop and it had me at WHEELS:

You know how I love wheels. They are my jam.

The top of the table was a mess though, and I couldn’t figure out what to do with it as I stood there, so I left it. (No returns so I had to make sure it would work.)

Fast forward a few weeks and I couldn’t get that table out of my head. I went back, it was still there and it came home with me. I still didn’t know what I was going to do with the top but I had to have it.

Initially I was thinking of sanding it down lightly and restaining the damaged parts, but when I got it home and took a closer look I realized it was a real mess:

 

I thought about keeping the leather top – for a minute. Then I got it cleaned off and saw it was beyond repair. The leather was cracked, which didn’t really bother me. But it also had paint and what looked like burn marks on it as well. And when I got it cleaned off I realized it was a very unattractive puke-brown color. Not so sad I couldn’t salvage it after that. :)

We have enough natural wood in the family room anyway, so my next plan was to paint it. I turned it over and realized I could take the top off:

Then I cleaned the heck out of the thing:

Grody. I lightly sanded it to get more grime off:

Then took it outside to spray prime it -- I just used a basic gray primer. By the way, I mention this a lot but it’s worth saying again – make sure to clean any piece you’re going to spray paint! If you don’t you’ll get the dreaded crackle.

I picked up another gray spray paint called silver fox by Valspar for the main color – I figured it would be easiest with the detail on the table.

Outside it looked decent, but when I brought it in I realized it was BLUE. Like, baby blue. What the??:

ARGH. Spray paint lids not matching the color are quickly becoming one of my biggest pet peeves. DIYer probs.

So I grabbed some chalk paint, which is what I should have done from the start. (But I still would have primed – these reddish stains can bleed through.) I used my CeCe Caldwell gray that I already had:

I shared my thoughts on this paint and how to apply it here – I really love these paints. It dries much lighter:

But when you apply the wax it gets richer and darker. I did have issues with the wax this time though, more on that in a minute.

I came up with a plan for the new tabletop – first I grabbed some scrap luan and cut it size with my jigsaw. I stained it just in case you’d see it under the new tabletop:

I used my nail gun to nail it into the edges where the old top sat. You can see there how much darker the chalk paint gets when you apply the wax by the way.

Then I used some very thin boards from Lowe’s (they are called craft boards) that I stained dark walnut by Minwax (one of my favorite colors):

 

The boards were more than I planned to spend but I needed a very specific thickness and they also had to be decent, stainable wood.

I put a little bit of glue down on the luan and then laid the craft boards down:

And nailed them in as well:

I took the old tabletop with me to the hardware store so I was able to find a combination of boards that fit the top almost perfectly. These boards aren’t all the same size – two are the same, the other two are different sizes. It didn’t bother me and I actually like that they aren’t all the same:

I’m not thrilled with how that skinny board stained up – I used conditioner on all of them and that one doesn’t look as good as the others. But it looks rustic…that’s what I’m going with for anyway. If it bugs me I’ll replace it. Or live with it. :)

The top is super smooth – I stood back when I was done and was SO happy with how it turned out:

I LOVE it:

The sectional will be moved soon so ignore the rug placement and all – this will get flipped to face the fireplace when the TV can be moved over. Hoping this week!

WHEELS:

I’m bugged out by the wax this time – this wax has done this the past two times I’ve used it. It gets blotchy and doesn’t dry well in some spots. Most of it looks great – it’s just certain areas. Usually this happens when you use too much, but I wiped this sucker well so I know it’s not that.

It’s frustrating because I’m going to have to sand down a couple spots and do another coat of paint and wax to correct it. But I LOVE the look – the dark wood combined with the gray is luscious. So it will be worth it. :)

There were a few issues along the way but I ended up with a coffee table I love in just the right size. The table was $20 and I spent about $25 on wood (those smaller pieces get expensive!) – not bad at all! Don’t overlook those pieces that are a mess – they can be turned into beauties!

Have you made over any messes lately?

Spray paint blues

Hey hey! I have a little taste test for you today! OK, not taste – don’t eat the spray paint. But a comparison of sorts. I told you about the blue desk for my office earlier this week. The one that I didn’t like in it’s blue state, at least in that room. I actually did love it in a more saturated tone than it’s before color – sometimes I find a deeper color shows off the detail better.

One of you commented that the desk, that was supposed to be navy blue, looked more like cobalt blue (a brighter tone). I totally agree – I even noticed it when I was painting but was hoping it would look different out of the bright sunlight.

It didn’t. :) Totally cobalt.

OK, here’s the thing – at first I tried the same navy blue on it that I used on my bedroom lamps:

And it was SO bright. It didn’t look like the same color in the least. I ended up using a different blue that looked a lot more navy, but when I compared the two inside they look like entirely different colors.

So I did a little test – first off, to show that the color on the cap of a spray paint can will sometimes look different than what you get when you spray. Secondly, a color in one spray paint will be different in another. I also noticed a big difference in coverage when I did this as well. 

I grabbed five blues out of my stash to do this little test and used some primed scrap wood:

So if you looked at this and looked at my lamps, I’m guessing you’d say the middle one is the paint I used, right?

Even I was surprised. I had to look back at my lamp post to see which one I used, and it was actually the blue second from the right:

Who would’ve thunk it? Here’s the first thing I noticed when I did this -- I love the HUGE selection of colors that Krylon offers but the coverage isn’t great. I never really noticed till I did it right next to others but it sprays very thin and doesn’t cover nearly as well as the others.

I did two coats of each color and the Krylon colors dripped every time:

Due to it spraying so thin I think – it just didn’t cover well, at least compared to some others.

Here’s the other thing – the colors can look much different when you spray. The Stonewash Denim cap on the left has a blue gray tone to it but is straight gray when you spray it. It’s hard to tell in the pics because it actually matches the color of the cap better than some of the others. But I bought this a while back thinking it would have more of a blue tone like the cap and it doesn’t.

The Valspar on the right, called Deep Sea Diving, is another one that is different than the cap. The cap looks like more of a peacock blue color and it sprays a definite cobalt blue.

Here’s the other three close up – note that the one on the left and the one in the middle are both a glossy navy blue:

Can you believe the difference? At the risk of sounding like a Rustoleum commercial, it covered SO much better. (I did two coats of each color.) And to me it looks like a true navy blue, right? The Krylon in the middle is what I used on our lamps and I was actually quite surprised when I looked back and figured that out.

You can see where it dripped a ton too. It would take a good four coats to get good coverage on this white. But as I mentioned, I used it on our lamps and didn’t have any issues. And the navy blue on the lamps is a perfect navy to me, so it will just take more coats to get that true color.

But more coats means using more paint, so that’s something to consider. I used nearly two cans to do the desk and I imagine it would take double that to get good coverage with the Krylon.

The color on the end is one called Mountain View and I’ve used it on a few things over the years. The color on the cap is pretty true to the color. It’s a nice light blue that leans ever-so-slightly gray.

Here’s a close up of the board so you can see the coverage (I shook them all for a few minutes before spraying):

Again, as far as being true to the color on the cap, Rustoleum wins. Coverage-wise, Valspar and Rustoleum did well. But I’ve used the two Krylon colors at the bottom and had no complaints at the time – it was only when I sprayed next to others that I noticed how thin it sprays.

I know it’s impossible to match the color of the paint to the cap exactly, but many of the colors I’ve used are a pretty darn good match. What’s frustrating is if you get it home and spray and it’s not what you thought, you’re stuck with it. You can’t return it after you’ve used it. That’s how you build up a ridiculous spray paint collection. ;)

Do you have a brand of spray paint that you love? A color that is your go-to? Are you still afraid to spray? If so, check out this post for helpful tips!

80’s nightstand redo

Hello all! How are you? Thanks for the lovely comments on my last post. ;) We are getting very excited!

Today I’m kicking off my no-spend August with a little redo for the bedroom. We’ve had short bookcases as our nightstands (you can see here) for years, but I wanted to replace them for many reasons – they were too tall for the new bed (and I was afraid I was going to lose an eye on the corner), they were SO dark in the room and the height made finding a lamp impossible. (It needed to be short but still substantial.)

SO. I started looking around. In my mind I’ve always wanted a small dresser on each side – maybe wood, maybe something I can paint. Something with at least a little CLOSED storage for me. (I learned from the bookcases.) I scoured Craigslist for months and nothing was coming up. I checked out antique shops and nothing was the right size and width (too wide). Then I started looking into a more traditional nightstand idea and looked at HomeGoods and TJ Maxx and nothin’.

Then…I shopped my house. ;) Dur. We had two that worked perfectly – I just didn’t think they would work perfectly. So late one night I spent the evening dragging furniture around the upstairs to see what would work. We’ve had an old nightstand in the family for years that has been passed around and it’s been sitting in our guest room:

Here’s the thing. It’s not what I would pick – but it was here and free and I was determined to make it work.

The thing was a MESS. Seriously gross. I wasn’t crazy about the reddish stain and it was destroyed in a few places so I knew that was going. What really bugged me was the hardware, so I took it all off:

It was super easy to get that little jobby off – just pry it off with a flat head screwdriver then pull the nails out.

The nightstand got a VERY thorough cleaning:

I cleaned in all of the little crevices – this is so important, especially when painting over dark wood. You’ll see why in a minute. Grrr.

Because the wood was such a mess I gave the flat surfaces a quick sanding to get that top layer off, then cleaned well again.

I used this BIN spray to prime the whole thing:

I have used this stuff for years and have a love/hate relationship with it. It is GREAT primer and I love that they offer it in a spray. But the spray can SUCKS. Every single one I’ve ever used sucks. No matter how much I shake it, no matter the angle – the spray doesn't come out evenly. It spatters, gets super watery – it’s just hard to use. But I continue to because it’s great when you need great coverage on a hard to prime piece.

OK, so I used chalk paint for the coat of white after the primer. Here’s the thing (that I already knew, thankfully) about using white chalk paint over a deep, dark wood – the pigment can react with the paint and make it pink. So I was cautioned awhile back to always prime a dark wood piece well before painting with that paint. (Usually with chalk paint you can just start painting without priming, but this isn’t always the case with a red/dark tone piece.)

So I must have missed cleaning or priming one spot well because wow, it was a mess. No matter what I did (I primed it, painted it twice, reprimed it, then painted it twice again), some of the pigment was coming through on one spot. It looked nasty. Grody:

Ugh. Gross, right? I was so dang annoyed. The rest of the nightstand looks amazing, so I know I just missed cleaning right there or something. So I got my BIN primer in the can out and put two or three coats over it with a brush (pic on the right) and so far it’s doing much better. I still haven’t even tried painting over it again with the chalk paint because I’m afraid it’s going to bring that nastiness out again.

That part isn’t bright white like the rest of it but I think I’m willing to live with that because I don’t want to prime again!

The holes for the old pulls were so big it was going to be a pain to fill them in, so I ended up just placing the new ones right over the holes:

They were very strategically placed. ;) I’d much prefer them moved in a little bit on the drawer, but I pick my DIY battles.

I already had the pulls – got them for another project and didn’t use them there. I thought they would look so lovely against the white and I love how it turned out:

I’m seriously so pleased with it! I didn’t think I would love it this much!

Next up, the lamps. I have no idea what I’m doing with them yet, but they aren’t staying brass:

They were in the basement and I did a little switcharoo – SO much better this way!

I went with white on the nightstand for a few reasons. I’m still deciding on some accent colors in the room (I don’t want it to be all neutral), so this gives me a blank slate to work with. Plus I had the white on hand.

The big reason was I pulled a pedestal table that used to be in the Bub’s nursery in as the other nightstand. It was a piece I picked up from the unfinished furniture store and painted when I was pregnant and couldn’t bear to part with it. It was already white, so to pull them together I wanted them both to be white.

At first I thought it was going to be too tall, but it is the perfect height and size! Again…I’m trying to use what we have here. I don’t know if these will stay forever (I’d like something more substantial down the line), but for now they work great for us:

    

Yes, I still need to cut in that wall color by the floor. It’s on my list. A few other things need to happen first. :) And YES, that lamp cord will be dealt with. Buwhahaaaa.

So have you tried using chalk paint over a dark wood piece? How did it work for you? It will never cease to amaze me how paint and new knobs can transform furniture!

The best part – we have two “new” nightstands and I didn’t spend a dime! This no-spend month is going well, so far. ;)